Scalix mit Debian Etch

Aus Neobikers Wiki
Zur Navigation springen Zur Suche springen

Vorbereitung

Etch Installation in XEN DomU

Ich starte mit der Installation auf einer frischen Etch-Installation unter XEN. Der Einfachheit halber benutze ich die xen-tools. 

apt-get install xen-tools
vi /etc/xen-tools/xen-tools.conf
#
# ...
lvm = vg
debootstrap = 1
#
##
#  Disk and Sizing options.
##
#
size   = 4Gb      # Disk image size.
memory = 128Mb    # Memory size
swap   = 128Mb    # Swap size
# noswap = 1      # Don't use swap at all for the new system.
fs     = ext3     # use the EXT3 filesystem for the disk image.
dist   = etch     # Default distribution to install.
image  = sparse   # Specify sparse vs. full disk images.
dhcp = 1
#
# Default kernel and ramdisk to use for the virtual servers
#
kernel = /boot/vmlinuz-2.6.18-4-xen-686
initrd = /boot/initrd.img-2.6.18-4-xen-686
#
# The default mirror for debootstrap which can be used to install
# Debian Sid, Sarge, and Etch.
#
mirror = http://ftp.de.debian.org/debian/
# ...

Etch-DomU Image erstellen und anschliessend starten 

xen-create-image --hostname=scx
vi /etc/xen/scx.cfg
xm create -c /etc/xen/scx.cfg
...
ethtool -K eth0 tx off
vi /etc/network/interfaces
# uncomment ethtool
# post-up ethtool -K eth0 tx off

Zusätzliche Pakete installieren

Jetzt die notwendigen Pakete installieren:

  • Apache, Sendmail
  • Postgres
  • Kerberos
  • SASL2
  • diverse Libraries
  • Sun Java
  • gawk, wget, elinks, ethtool, less, host
apt-get install -u apache2 sendmail sendmail-doc
apt-get install -u postgresql
apt-get install -u krb5-config krb5-doc krb5-user libkadm55 libkrb53
apt-get install -u saslauthd libsasl2-modules libsasl2-gssapi-mit sasl2-bin libssl0.9.7
apt-get install -u libxml2 libglib2.0-0 libstdc++2.10-glibc2.2 libstdc++5
apt-get install -u sun-java5-jre
apt-get install -u gawk elinks wget w3m less ethtool host

Folgendes habe ich angepasst (siehe unten):

  • Sendmail-Dual Konfiguration
  • Smarthost
  • Masquerading
  • Amavisd-new integrieren

Ich fange mit Amavisd-new, Spamassassin und Clamav an.

Sendmail mit Amavisd-New konfigurieren

Nach der Installation muss Amavis die zentrale Spamassassin-Konfigurationsdatei etc/spamassassin/local.cf untergeschoben werden und dem Benutzer clamav die Gruppe amavis zugeordnet werden: 

apt-get install -u amavisd-new clamav clamav-daemon spamassassin
adduser clamav amavis
mkdir ~amavis/.spamassassin
ln -s /etc/spamassassin/local.cf \
~amavis/.spamassassin/user_prefs

Die Amavisd Konfiguration wird angepasst, unter /etc/amavis/conf.d/50-user: 

use strict;

#
# Place your configuration directives here.  They will override those in
# earlier files.
#
# See /usr/share/doc/amavisd-new/ for documentation and examples of
# the directives you can use in this file
#

@bypass_virus_checks_maps = (
   \%bypass_virus_checks, \@bypass_virus_checks_acl, \$bypass_virus_checks_re);

@bypass_spam_checks_maps = (
   \%bypass_spam_checks, \@bypass_spam_checks_acl, \$bypass_spam_checks_re);

$final_virus_destiny      = D_DISCARD;  # (data not lost, see virus quarantine)
$final_banned_destiny     = D_DISCARD;  # D_REJECT when front-end MTA
$final_spam_destiny       = D_DISCARD;
$final_bad_header_destiny = D_PASS;     # False-positive prone (for spam)

#------------ Do not modify anything below this line -------------
1;  # insure a defined return

Amavisd Neustart: 

/etc/init.d/amavis restart

Sendmail-Dual-Konfiguration

Um Amavisd-New mit Spamassassin und Clamav in sendmail zu integrieren verwende ich das Sendmail-Dual Setup (welches der Konfiguration von Exim mit Amavisd-new entspricht).

Auszug aus /usr/share/doc/amavisd-new/README.sendmail-dual.gz: 

The following setup is described in this document:

      ............................   ............................
      : sendmail instance MTA-RX :   : sendmail instance MTA-TX :
      :                          :   :                          :
 25 -----> \ (mqueue-rx)         :   : (mqueue)          / -------> forward
587 ----->  > -queue-            :   : -queue-   ->-----+       :
 ^    :    /     | MAIL_HUB,     :   :   |               \ -------> local
 |    :          v SMART_HOST    :   :   ^                      :  delivery
msp   ...........|................   ....|.......................
                 |                       ^ loopback interface
                 v                       | port 10025
 loopback interf.| port 10024            |
            .....|.......................|.............
            : $inet_socket_port=10024    |            :
            :                            |            :
            : $forward_method='smtp:127.0.0.1:10025'  :
            : $notify_method ='smtp:127.0.0.1:10025'  :
            :                                         :
            :    amavisd-new                          :
            ...........................................

Die Sendmail Konfiguration ist unter /etc/mail/sendmail-rx.mc und /etc/mail/sendmail-tx.mc definiert.

Sendmail-RX

/etc/mail/sendmail-rx.mc

include(`/usr/share/sendmail/cf/m4/cf.m4')dnl
VERSIONID(`$Id: sendmail-rx.mc, v 8.13.8-3 2006-12-08 20:21:10 neobiker Exp $')
OSTYPE(`debian')dnl
DOMAIN(`debian-mta')dnl
dnl #
dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE
undefine(`confHOST_STATUS_DIRECTORY')dnl        #DAEMON_HOSTSTATS=
dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE
dnl #
define(`confRUN_AS_USER',`smmta:smmsp')dnl
DAEMON_OPTIONS(`Family=inet, Name=MTA-RX, Port=smtp, Addr=127.0.0.1')dnl
FEATURE(`access_db', , `skip')dnl
FEATURE(`authinfo', `hash /etc/mail/auth/client-info')dnl
define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
dnl #
include(`/etc/mail/sasl/sasl.m4')dnl
include(`/etc/mail/tls/starttls.m4')dnl
dnl #
define(`confPID_FILE', `/var/run/sendmail/mta/sendmail-rx.pid')dnl  Non-default pid file
define(`STATUS_FILE', `/etc/mail/stat-rx')dnl    Non-default stat file
define(`QUEUE_DIR', `/var/spool/mqueue-rx')dnl   Non-default queue area
define(`confQUEUE_SORT_ORDER',`Modification')dnl Modif or Random are reasonable
dnl #
dnl Match the number of queue runners (R=) to the number of amavisd-new child
dnl processes ($max_servers). 2 to 7 OK, 10 is plenty, 20 is too many
QUEUE_GROUP(`mqueue', `P=/var/spool/mqueue-rx, R=2, F=f')dnl
dnl #
FEATURE(stickyhost)dnl
define(`MAIL_HUB',   `esmtp:[127.0.0.1]')dnl  Forward all local mail to amavisd
define(`SMART_HOST', `esmtp:[127.0.0.1]')dnl  Forward all other mail to amavisd
define(`LOCAL_RELAY',`esmtp:[127.0.0.1]')dnl
define(`confDELIVERY_MODE',`q')dnl     Delivery mode: queue only (a must,
define(`ESMTP_MAILER_ARGS',`TCP $h 10024')dnl  To tcp port 10024 instead of 25
MODIFY_MAILER_FLAGS(`ESMTP', `+z')dnl  Speak LMTP (this is optional)
define(`SMTP_MAILER_MAXMSGS',`10')dnl  Max no. of msgs in a single connection
define(`confTO_DATAFINAL',`20m')dnl    20 minute timeout for content checking
dnl #
undefine(`ALIAS_FILE')dnl     No aliases file, all local mail goes to MAIL_HUB
define(`confFORWARD_PATH')dnl Empty search path for .forward files
undefine(`UUCP_RELAY')dnl
undefine(`BITNET_RELAY')dnl
undefine(`DECNET_RELAY')dnl
MAILER(`smtp')dnl
Sendmail-TX

/etc/mail/sendmail-tx.mc

define(`_USE_ETC_MAIL_')dnl
include(`/usr/share/sendmail/cf/m4/cf.m4')dnl
VERSIONID(`$Id: sendmail-tx.mc, v 8.13.8-3 2006-12-08 20:21:10 neobiker Exp $')
OSTYPE(`debian')dnl
DOMAIN(`debian-mta')dnl
dnl #
dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE
undefine(`confHOST_STATUS_DIRECTORY')dnl        #DAEMON_HOSTSTATS=
dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE
dnl #
FEATURE(`no_default_msa')dnl
FEATURE(`access_db', , `skip')dnl
DAEMON_OPTIONS(`Family=inet, Name=MTA-TX, Port=10025, Addr=127.0.0.1')dnl
dnl #
include(`/etc/mail/sasl/sasl.m4')dnl
include(`/etc/mail/tls/starttls.m4')dnl
dnl #
include(`/etc/mail/m4/dialup.m4')dnl
include(`/etc/mail/m4/provider.m4')dnl
dnl #
dnl # Masquerading options
FEATURE(`always_add_domain')dnl
MASQUERADE_AS(`scx.neobiker.de')dnl
FEATURE(`allmasquerade')dnl
FEATURE(`masquerade_envelope')dnl
dnl #
define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
FEATURE(`authinfo', `hash /etc/mail/auth/client-info')dnl
define(`confREFUSE_LA',999)dnl  Disable the feature, limiting belongs to MTA-RX
define(`confMAX_DAEMON_CHILDREN',0)dnl  Disable, limiting belongs to MTA-RX
FEATURE(`nocanonify')dnl      Host/domain names are considered canonical
define(`confSMTP_LOGIN_MSG', `$w.tx.$m Sendmail $v/$Z; $b')dnl
define(`confTO_IDENT', `0')dnl  Disable IDENT
dnl #
dnl # Default Mailer setup
MAILER_DEFINITIONS
MAILER(scalix)dnl
MAILER(`local')dnl
MAILER(`smtp')dnl

Sendmail-Smarthost

Der Smarthost wird unter /etc/mail/m4/provider.m4 eintragen (und von dort importiert): 

define(`SMART_HOST', `mail.1und1.de')

Sendmail konfigurieren und starten

cp -p /var/spool/mqueue /var/spool/mqueue-rx

m4 /etc/mail/hostname-rx.mc > /etc/mail/sendmail-rx.cf
m4 /etc/mail/hostname-tx.mc > /etc/mail/sendmail-tx.cf

/usr/sbin/sendmail -C /etc/mail/sendmail-rx.cf -L sm-mta-rx -bd -qp
/usr/sbin/sendmail -C /etc/mail/sendmail-tx.cf -L sm-mta-tx -bd -q15m
/usr/sbin/sendmail -Ac -L sm-msp-queue -q10m

Sendmail-Dual Initscript

Ich habe das normale Sendmail-Initscript angepasst, damit der 2.te Sendmail-Prozess (MTA-RX zus. zu MTA-TX) berücksichtigt wird. Die Anpassungen sind im wesentlichen aus den normalen Prozeduren kopiert und angepasst. Im Original werden die Variablen MTAL_XXXX verwendet, ich habe für den zusätzlichen MTA-RX Prozess diese einfach als MTAR_XXXX wo nötig ergänzt und eingefügt.

Starten wie üblich, zum Debuggen den tail Befehl verwenden, monitoring mit ps: 

# tail -f /var/log/mail.info &
# /etc/init.d/sendmail-dual start
# ps aux|grep -v grep|grep sendmail
root      5885  0.0  1.5   8344  2604 ?        Ss   19:11   0:00 sendmail: MTA: accepting connections
smmta     5886  0.0  1.0   8336  1764 ?        S    19:11   0:00 sendmail: MTA: running queue: /var/spool/mqueue-rx
root      5890  0.0  1.5   8332  2612 ?        Ss   19:11   0:00 sendmail: MTA: accepting connections
#

/etc/init.d/sendmail-dual (Ich habe das normale /etc/init.d/sendmail File ersetzt). 

#!/bin/sh -e
#
# $Sendmail: init.d,v 8.13.8 2006-12-08 20:21:10 cowboy Exp $
#
# Sendmail rc script for Debian (/etc/init.d/sendmail)
# all the work is done by the imbedded copy of /usr/share/sendmail/sendmail
#
# Copyright (c) 2001-2005, Richard Nelson <cowboy@debian.org>.
#
# Notes (to all):
#       * *** Do not edit this file *** Instead edit /etc/mail/sendmail.conf
#
# Notes (to self):
#       *
#
set -e;
# set -x;
PATH=/bin:/usr/bin:/sbin:/usr/sbin;


#!/bin/sh -e
#-----------------------------------------------------------------------------
# $Sendmail: sm_helper.sh,v 8.13.8 2006-12-08 20:21:10 cowboy Exp $
#
# Copyright (c) 1998-2005 Richard Nelson.  All Rights Reserved.
#
#       Debian helper function script for Debian Sendmail
#         Note: this file supports 8.7.6 - 9.0.0
#
# Notes (to all):
#       *
#
# Notes (to self):
#       * clean_queues fubar, esp wrt MSP
#
#-----------------------------------------------------------------------------
#
set -e;
DEBUG=0;

# LSB compliance (kinda)
if [ -f /lib/lsb/init-functions ]; then
        . /lib/lsb/init-functions;
else
        log_begin_msg()   { echo "$@"; };
        log_success_msg() { echo "$@"; };
        log_warning_msg() { echo "$@"; };
        fi;

#------------------------------------------------------------------------------
# Parameters for the sendmail daemon
# Do *NOT* touch these lines, instead, edit /etc/mail/sendmail.conf
# The _PARMS lines are listed in precedence order
#------------------------------------------------------------------------------
Get_Parameters () {

        # Main configuration parameters in /etc/mail/sendmail.conf
        DAEMON_MODE='Daemon';
        DAEMON_PARMS='';
        DAEMON_UID='root';
        QUEUE_MODE="$DAEMON_MODE";
        QUEUE_INTERVAL='10m';
        QUEUE_PARMS='';
        MSP_MODE="$QUEUE_MODE";
        MSP_INTERVAL="$QUEUE_INTERVAL";
        MSP_PARMS="";
        MISC_PARMS='';
        CRON_PARMS='';
        LOG_CMDS='No';

        # Secondary (non-documented) parameters in /etc/mail/sendmail.conf
        # Caveat Emptor: change these at your own risk - they impact several
        # disjoint pieces parts...
        SENDMAIL_ROOT='/var/run/sendmail';
        MTA_DAEMON='/usr/sbin/sendmail-mta';
        MTA_COMMAND='/usr/sbin/sendmail-mta';
        MTA_A='-Am';
        MTAR_L='-L sm-mta-rx';
        MTAL_L='-L sm-mta-tx';
        MTAL_L_QUEUE='-L sm-mta-queue';
        MTAL_L_RUNQ='-L sm-mta-runq';
        MTA_ROOT="${SENDMAIL_ROOT}/mta";
        MTAR_PIDFILE="${MTA_ROOT}/sendmail-rx.pid";
        MTAL_PIDFILE="${MTA_ROOT}/sendmail.pid";
        MTAL_SOCKET="${MTA_ROOT}/smsocket";
        MTAL_CNTL="${MTA_ROOT}/smcontrol";
        MTAQ_L='-L sm-que';
        MTAQ_L_RUNQ='-L sm-que-runq';
        MTAQ_PIDFILE="${MTA_ROOT}/queue.pid";
        MTAQ_SOCKET="${MTA_ROOT}/qusocket";
        MTAQ_CNTL="${MTA_ROOT}/qucontrol";
        MSP_DAEMON='/usr/sbin/sendmail-msp';
        MSP_COMMAND='/usr/sbin/sendmail-msp';
        MSP_A='-Ac';
        MSP_L='-L sm-msp';
        MSP_L_QUEUE='-L sm-msp-queue';
        MSP_ROOT="${SENDMAIL_ROOT}/msp";
        MSP_PIDFILE="${MSP_ROOT}/sendmail.pid";
        MSP_SOCKET="${MSP_ROOT}/smsocket";
        MSP_CNTL="${MSP_ROOT}/smcontrol";

        # Pull in any user modified variables
        if [ -f /etc/mail/sendmail.conf ]; then
                . /etc/mail/sendmail.conf;
                fi;

        # These can't be user customized
        SM_Get_Parameters='yes';
        PATH='/bin:/usr/bin:/sbin:/usr/sbin';
        STAMP_DIR="${SENDMAIL_ROOT}/stampdir";
        START_MTAR_CMD="start-stop-daemon \
                --pidfile $MTAR_PIDFILE \
                --exec $MTA_DAEMON \
                --startas $MTA_COMMAND \
                --start";
        STOP_MTAR_CMD="start-stop-daemon \
                --pidfile $MTAR_PIDFILE \
                --name sendmail-mta \
                --stop";
        SIGNAL_MTAR_CMD="start-stop-daemon \
                --pidfile $MTAR_PIDFILE \
                --name sendmail-mta \
                --stop";
        START_MTAL_CMD="start-stop-daemon \
                --pidfile $MTAL_PIDFILE \
                --exec $MTA_DAEMON \
                --startas $MTA_COMMAND \
                --start";
        STOP_MTAL_CMD="start-stop-daemon \
                --pidfile $MTAL_PIDFILE \
                --name sendmail-mta \
                --stop";
        SIGNAL_MTAL_CMD="start-stop-daemon \
                --pidfile $MTAL_PIDFILE \
                --name sendmail-mta \
                --stop";
        START_MTAQ_CMD="start-stop-daemon \
                --pidfile $MTAQ_PIDFILE \
                --make-pidfile \
                --exec $MTA_DAEMON \
                --startas $MTA_COMMAND \
                --start";
        STOP_MTAQ_CMD="start-stop-daemon \
                --pidfile $MTAQ_PIDFILE \
                --name sendmail-mta \
                --stop";
        SIGNAL_MTAQ_CMD="start-stop-daemon \
                --pidfile $MTAQ_PIDFILE \
                --name sendmail-mta \
                --stop";
        START_MSP_CMD="start-stop-daemon \
                --pidfile $MSP_PIDFILE \
                --exec $MSP_DAEMON \
                --startas $MSP_COMMAND \
                --chuid smmsp \
                --start";
        STOP_MSP_CMD="start-stop-daemon \
                --pidfile $MSP_PIDFILE \
                --name sendmail-msp \
                --stop";
        SIGNAL_MSP_CMD="start-stop-daemon \
                --pidfile $MSP_PIDFILE \
                --name sendmail-msp \
                --stop";
        NAME='sendmail';
        FLAGS='defaults 50';

        # Sanitize some keyword entries
        DAEMON_MODE=$(echo "$DAEMON_MODE" | tr '[:upper:]' '[:lower:]');
        QUEUE_MODE=$(echo  "$QUEUE_MODE"  | tr '[:upper:]' '[:lower:]');
        MSP_MODE=$(echo    "$MSP_MODE"    | tr '[:upper:]' '[:lower:]');

        # See if we can share the listener and queue-runner daemon:
        #       * Both must be in daemon mode
        #       * They must have the same (possibly empty) parameters
        if [ "$DAEMON_MODE" = "daemon" \
           -a \( \( "$QUEUE_MODE" = "cron" -o "$QUEUE_MODE" = "none" \) \
                  -o \( "$QUEUE_MODE" != "cron" \
                         -a "$QUEUE_MODE" != "none" \
                         -a "$DAEMON_PARMS" = "$QUEUE_PARMS" \
                         \) \
                  \) ]; then
                SPLIT_DAEMON=0;
        else
                SPLIT_DAEMON=1;
                fi;

        # Version dependant support:
        # 8.12.0+ M{TA,MSP}_A
        if [ ! -f /usr/share/sendmail/cf/feature/msp.m4 ]; then
                MTA_A='';
                MTAL_L='';
                MTAL_L_QUEUE='';
                MSP_A='';
                MSP_L='';
                MSP_L_QUEUE='';
                fi;
        };
#------------------------------------------------------------------------------


#------------------------------------------------------------------------------
# enhanced sendmail startup
#------------------------------------------------------------------------------
start_mta () {
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # If already running, don't start it...
        if is_running mta; then
                log_warning_msg 'MTA is already running.';
                return;
                fi;
        #
        # Check if we're going to run a daemon (and how many):
        daemon_check;
        #
        # Mark restarted for communication betwixt here and /etc/mail/Makefile
        touch $STAMP_DIR/reload;
        #
        if [ "$DAEMON_MODE" = "daemon" ]; then
                #
                # Allow Unix (local) connections betwixt MSP/MTA:
                touch $MTAL_SOCKET;
                #
                # We can only afford to clean the MTA queues if running daemon mode,
                # otherwise, there is a chance that a cronjob might still be using
                # the queue...  Thats also why we don't clean the MSP queues herein.
                #clean_queues;
                #
                # cd to a safe place to stash core files...
                cd $MTA_ROOT;
                #
                # if running in -dual config, run the receive daemon
                CMD="$START_MTAR_CMD -- $MTAR_PARMS";
                if [ "$LOG_CMDS" = "Yes" ]; then
                        logger -i -p mail.debug -- "$0 $CMD";
                        fi;
                $CMD &
                CMD="$START_MTAL_CMD -- $MTAL_PARMS";
                if [ "$LOG_CMDS" = "Yes" ]; then
                        logger -i -p mail.debug -- "$0 $CMD";
                        fi;
                $CMD &
                #
                # Update permissions on smsocket
                sleep 2;
                chown $DAEMON_UID:smmsp $MTAL_SOCKET;
                chmod 0666 $MTAL_SOCKET;
                fi;
        #
        # Check for split daemon mode (separate listener/queue runner)
        if [ "$SPLIT_DAEMON" -eq 1 ]; then
                CMD="$START_MTAQ_CMD -- $MTAQ_PARMS";
                if [ "$LOG_CMDS" = "Yes" ]; then
                        logger -i -p mail.debug -- "$0 $CMD";
                        fi;
        $CMD &
                sleep 2;
                qp=`expr "${MTAQ_PARMS}" : '.*\(-qp[0-9]*[smhdw]\)'` || true;
                if [ -z "$qp" ]; then
                        chmod 0664 $MTAQ_PIDFILE;
                else
                        qc=`ps --no-headers -fCsendmail \
                                | egrep -e 'Queue control' \
                                | awk '{print $2}'`;
                        if [ -z "$qc" ]; then
                                rm -f $MTAQ_PIDFILE;
                        else
                                chmod 0664 $MTAQ_PIDFILE;
                                printf "$qc\n$MTA_COMMAND $MTAQ_PARMS" > $MTAQ_PIDFILE;
                                fi;
                        fi;
                fi;
        #
        # if running split service, run the client queues (just to make sure)
        if check_msp; then
                $MSP_COMMAND -q $MSP_A $MSP_L_QUEUE $MSP_PARMS $MISC_PARMS;
                fi;
        };

start_msp () {
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # If already running, don't start it...
        if is_running msp; then
                log_warning_msg 'MSP is already running.';
                return;
                fi;
        #
        # Check to see if MSP mode is indeed available
        if ! check_msp; then
                return;
                fi;
        #
        # Check if we're going to run a daemon:
        if [ "$MSP_MODE" != 'daemon' ]; then
                return;
                fi;
        #
        # We can only afford to clean the MSP queues if running daemon mode,
        # otherwise, there is a chance that a cronjob might still be using
        # the queue...  Thats also why we don't clean the MTA queues herein.
        #clean_queues /var/spool/mqueue-client;
        #
        # cd to a safe place to stash core files...
        cd $MSP_ROOT;
        $START_MSP_CMD -- \
                $MSP_A $MSP_L -q${MSP_INTERVAL} $MSP_PARMS $MISC_PARMS &
        };

start_sendmail () {
        start_mta;
        if check_msp; then
                start_msp;
                fi;
        };
#------------------------------------------------------------------------------


#------------------------------------------------------------------------------
# enhanced sendmail reload
#------------------------------------------------------------------------------
reload_mta () {
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # reload (signal -HUP) is *much* better/faster than stop/start
        #
        # Mark restarted for communication betwixt here and /etc/mail/Makefile
        touch $STAMP_DIR/reload;
        #
        # If not running, just start it...
        if ! is_running mta; then
                start_mta;
                fi;
        #
        # Is running, must signal it...
        $SIGNAL_MTAL_CMD --signal HUP --oknodo --quiet || true;
        sleep 2;
        chown $DAEMON_UID:smmta $MTAL_SOCKET;
        chmod 0666 $MTAL_SOCKET;
        $SIGNAL_MTAR_CMD --signal HUP --oknodo --quiet || true;
        #
        # Check for split daemon mode (separate listener/queue runner)
        if [ "$SPLIT_DAEMON" -eq 1 ]; then
                $SIGNAL_MTAQ_CMD --signal HUP --oknodo --quiet || true;
                fi;
        };

reload_msp () {
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # reload (signal -HUP) is *much* better/faster than stop/start
        #
        # If not running, just start it...
        if ! is_running msp; then
                start_msp;
                fi;
        #
        # Is running, must signal it...
        $SIGNAL_MSP_CMD --signal HUP --oknodo --quiet || true;
        };

reload_sendmail () {
        reload_mta;
        if check_msp; then
                reload_msp;
                fi;
        };
#------------------------------------------------------------------------------


#------------------------------------------------------------------------------
# enhanced sendmail shutdown
#------------------------------------------------------------------------------
stop_mta () {
        local cnt;
        stopped=0;
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # If not running, don't stop it...
        #if ! is_running mta; then
        #       return;
        #       fi;
        #
        # Is running, must stop it...
        $STOP_MTAR_CMD --signal TERM --quiet --oknodo > /dev/null;
        $STOP_MTAL_CMD --signal TERM --quiet --oknodo > /dev/null;
        #
        #               Now we have to wait until sendmail has _really_ stopped.
        #
        sleep 2;
        if $STOP_MTAL_CMD --signal TERM --quiet > /dev/null; then
                echo -n ' Waiting .';
                cnt=0;
                while $STOP_MTAL_CMD --signal TERM --quiet > /dev/null; do
                        cnt=`expr $cnt + 1`;
                        if [ $cnt -gt 60 ]; then
                                #
                                #               Waited 120 seconds now. Fail.
                                #
                                echo -n ' Failed ';
                                stopped=1;
                                break;
                                fi;
                        sleep 2;
                        echo -n '.';
                        done;
                echo -n ' Done ';
                fi;
        # Remove pidfile if stopped
        if ! $STOP_MTAL_CMD --signal TERM --quiet > /dev/null; then
                rm -f "$MTAL_PIDFILE";
                fi
        #
        #               Now we have to wait until sendmail has _really_ stopped.
        #
        if $STOP_MTAR_CMD --signal TERM --quiet > /dev/null; then
                echo -n ' Waiting .';
                cnt=0;
                while $STOP_MTAR_CMD --signal TERM --quiet > /dev/null; do
                        cnt=`expr $cnt + 1`;
                        if [ $cnt -gt 60 ]; then
                                #
                                #               Waited 120 seconds now. Fail.
                                #
                                echo -n ' Failed ';
                                stopped=1;
                                break;
                                fi;
                        sleep 2;
                        echo -n '.';
                        done;
                echo -n ' Done ';
                fi;
        # Remove pidfile if stopped
        if ! $STOP_MTAR_CMD --signal TERM --quiet > /dev/null; then
                rm -f "$MTAR_PIDFILE";
                fi
        };

stop_queue () {
        local cnt;
        stopped=0;
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # If not running, don't stop it...
        if ! is_running queue; then
                return;
                fi;
        #
        # Is running, must stop it...
        $STOP_MTAQ_CMD --signal TERM --quiet --oknodo > /dev/null;
        #
        #               Now we have to wait until sendmail has _really_ stopped.
        #
        sleep 2;
        if $STOP_MTAQ_CMD --signal TERM --quiet > /dev/null; then
                echo -n ' Waiting .';
                cnt=0;
                while $STOP_MTAQ_CMD --signal TERM --quiet > /dev/null; do
                        cnt=`expr $cnt + 1`;
                        if [ $cnt -gt 60 ]; then
                                #
                                #               Waited 120 seconds now. Fail.
                                #
                                echo -n ' Failed ';
                                stopped=1;
                                break;
                                fi;
                        sleep 2;
                        echo -n '.';
                        done;
                echo -n ' Done ';
                fi;
        # Remove pidfile iff stopped
        if ! $STOP_MTAQ_CMD --signal TERM --quiet > /dev/null; then
                rm -f "$MTAQ_PIDFILE";
                fi
        };

stop_msp () {
        local cnt;
        stopped=0;
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # If not running, don't stop it...
        if ! is_running msp; then
                return;
                fi;
        #
        # Is running, must stop it...
        $STOP_MSP_CMD --signal TERM --quiet --oknodo > /dev/null;
        #
        #               Now we have to wait until sendmail has _really_ stopped.
        #
        sleep 2;
        if $STOP_MSP_CMD --signal TERM --quiet > /dev/null; then
                echo -n 'Waiting .';
                cnt=0;
                while $STOP_MSP_CMD --signal TERM --quiet > /dev/null; do
                        cnt=`expr $cnt + 1`;
                        if [ $cnt -gt 60 ]; then
                                #
                                #               Waited 120 seconds now. Fail.
                                #
                                echo -n ' Failed ';
                                stopped=1;
                                break;
                                fi;
                        sleep 2;
                        echo -n '.';
                        done;
                echo -n ' Done ';
                fi;
        # Remove pidfile iff stopped
        if ! $STOP_MSP_CMD --signal TERM --quiet > /dev/null; then
                rm -f "$MSP_PIDFILE";
                fi;
        };

stop_sendmail () {
        if check_msp; then
                stop_msp;
                fi;
        stop_mta;
        stop_queue;
        };
#------------------------------------------------------------------------------


#------------------------------------------------------------------------------
# Check to see if sendmail is running
#------------------------------------------------------------------------------
is_running () {
        local result;
        result=1;
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # Determine proper pidfile to check
        who=$(echo      "$1"  | tr '[:upper:]' '[:lower:]');
        case $who in
                mta)
                        PIDFILE="$MTAL_PIDFILE";
                        PIDFILE2="$MTAR_PIDFILE";
                        ;;
                queue)
                        PIDFILE="$MTAQ_PIDFILE";
                        ;;
                msp)
                        PIDFILE="$MSP_PIDFILE";
                        ;;
                *)
                        PIDFILE="$1";
                        ;;
                esac;
        #
        # If no pidfile, not running
        # Extract pid/command and see if still running
        # Remove pidfile if app didn't
        # Also remove any control sockets
        for PIDFILE in $PIDFILE $PIDFILE2; do
            if [ -s $PIDFILE ]; then
                PID=`head -n 1 $PIDFILE 2>/dev/null`;
                COMMAND=`tail -n 1 $PIDFILE`;
                if [ ! -z "`ps --no-heading $PID`" ]; then
                        result=0;
                else
                        rm -f $PIDFILE;
                        case $who in
                                mta)
                                        rm -f $MTAL_SOCKET $MTAL_CNTL;
                                        ;;
                                queue)
                                        rm -f $MTAQ_SOCKET $MTAQ_CNTL;
                                        ;;
                                msp)
                                        rm -f $MSP_SOCKET $MSP_CNTL;
                                esac;
                        fi;
                fi;
        done
        return $result;
        };
#------------------------------------------------------------------------------


#------------------------------------------------------------------------------
# Check to see if running split service (MTA, MSP)
# Must be at 8.12.0+ for this support
#------------------------------------------------------------------------------
check_msp () {
        local result;
        result=1;
        if [ ! -f /usr/share/sendmail/cf/feature/msp.m4 ]; then
                result=1;
        elif [ -s /etc/mail/submit.cf ] \
        && [ -s /etc/mail/submit.mc ]; then
                if grep -qEe "^[[:space:]]*\`?FEATURE\([[:space:]]*\`?msp" \
                        /etc/mail/submit.mc; then
                        result=0;
                        fi;
                fi;
        return $result;
        };
#------------------------------------------------------------------------------


#------------------------------------------------------------------------------
# Miscellaneous sendmail command support for MSP/MTA split
# mailstats, mailq, runq
#------------------------------------------------------------------------------
newaliases () {
        #
        # Obtain parameters IFF needed
        if [ -z "$SM_Get_Parameters" ]; then
                Get_Parameters;
                fi;
        #
        $MTA_COMMAND $MTA_A -bi $*;
        };

hoststat () {
        #
        # Obtain parameters IFF needed
        if [ -z "$SM_Get_Parameters" ]; then
                Get_Parameters;
                fi;
        #
        $MTA_COMMAND $MTA_A -bh $*;
        };

purgestat () {
        local parms;
        parms=$(echo "$1" | tr '[:upper:]' '[:lower:]');
        case $parms in
                n*)             # Now
                        parms='-O Timeout.hoststatus=1s';
                        shift;
                        ;;
                *)
                        parms='';
                        ;;
                esac;
        #
        # Obtain parameters IFF needed
        if [ -z "$SM_Get_Parameters" ]; then
                Get_Parameters;
                fi;
        #
        $MTA_COMMAND $MTA_A -bH $parms $*;
        };

mailstats () {
        #
        # Obtain parameters IFF needed
        if [ -z "$SM_Get_Parameters" ]; then
                Get_Parameters;
                fi;
        #
        #if running split service, show the client status first
        if check_msp; then
                echo 'MSP statistics...';
                #check if we have a status file for the MSP
                statusfile=$(grep -Ee '^O StatusFile=/.*' \
                        /etc/mail/submit.cf | cut -d= -f2);
                if [ -n $statusfile ]; then
                        /usr/lib/sm.bin/mailstats -C \
                                /etc/mail/submit.cf $* || true;
                        fi;
                echo 'MTA statistics...';
                fi;
        #check if we have a status file for the MTA
        statusfile=$(grep -Ee '^O StatusFile=/.*' \
                /etc/mail/sendmail.cf | cut -d= -f2);
        if [ -n $statusfile ]; then
                /usr/lib/sm.bin/mailstats $* || true;
                fi;
        };

mailq () {
        #
        # Obtain parameters IFF needed
        if [ -z "$SM_Get_Parameters" ]; then
                Get_Parameters;
                fi;
        #
        # if running split service, show the client queues first
        if check_msp; then
                echo 'MSP Queue status...';
                #
                # Check to see if shared memory is in use (8.12.0+)
                if grep -qEe "^[[:space:]]*\`?define\(\`?confSHAREDMEMORYKEY'?[[:space:]]*,[[:space:]]*\`?0*[1-9]+[0-9]*'?[[:space:]]*\)" \
                        /etc/mail/submit.mc; then
                        $MSP_COMMAND -bP || true;
                        fi;
                $MSP_COMMAND -bp $MSP_A $MISC_PARMS $* || true;
                echo 'MTA Queue status...';
                fi;
        #
        # Check to see if shared memory is in use (8.12.0+)
        if grep -qEe "^[[:space:]]*\`?define\(\`?confSHAREDMEMORYKEY'?[[:space:]]*,[[:space:]]*\`?0*[1-9]+[0-9]*'?[[:space:]]*\)" \
                /etc/mail/sendmail.mc; then
                $MTA_COMMAND -bP || true;
                fi;
        $MTA_COMMAND -bp $MTA_A $MISC_PARMS $* || true;
        };

runq () {
        #
        # Obtain parameters IFF needed
        if [ -z "$SM_Get_Parameters" ]; then
                Get_Parameters;
                fi;
        #
        # if running split service, run the client queues first
        if check_msp; then
                echo 'Running the MSP queue...';
                $MSP_COMMAND -q $MSP_A \
                        $MSP_L_QUEUE $MSP_PARMS $MISC_PARMS $* || true;
                echo 'Running the MTA queues...';
                fi;
        if [ "$SPLIT_DAEMON" -eq 0 ]; then
                $MTA_COMMAND -q $MTA_A \
                        $MTAL_L_RUNQ $QUEUE_PARMS $MISC_PARMS $* || true;
        else
                $MTA_COMMAND -q $MTA_A \
                        $MTAQ_L_RUNQ $QUEUE_PARMS $MISC_PARMS $* || true;
                fi;
        };

control () {
        #
        # Obtain parameters IFF needed
        if [ -z "$SM_Get_Parameters" ]; then
                Get_Parameters;
                fi;
        local parms;
        parms="$*";
        if [ -z "$parms" ]; then
                parms='help';
                fi;
        if is_running mta; then
                /usr/share/sendmail/smcontrol.pl $parms;
        else
                echo 'MTA: is not running';
                fi;
        };
#------------------------------------------------------------------------------


#------------------------------------------------------------------------------
# Print status of running job(s)
#------------------------------------------------------------------------------
status () {
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # Obtain parameters IFF needed
        if [ -z "$SM_Get_Parameters" ]; then
                Get_Parameters;
                fi;
        #
        # if running split service, check the client status first
        if check_msp; then
                if is_running msp; then
                        echo "MSP: $PID $COMMAND";
                        ps -fwp $PID;
                        if [ -S ${MSP_CNTL} ]; then
                                /usr/share/sendmail/smcontrol.pl \
                                        -f ${MSP_CNTL} status || true;
                                fi;
                elif [ $MSP_MODE = 'cron' ]; then
                        echo "MSP: is run via cron ($MSP_INTERVAL)";
                elif [ $MSP_MODE = 'none' ]; then
                        echo 'MSP: is disabled';
                else
                        echo 'MSP: is not running';
                        fi;
                fi;
        #
        # Check MTA listener
        if is_running mta; then
                echo "MTA: $PID $COMMAND";
                ps -fwp $PID;
                if [ -S ${MTAL_CNTL} ]; then
                        /usr/share/sendmail/smcontrol.pl \
                                -f ${MTAL_CNTL} status || true;
                        fi;
        elif [ $DAEMON_MODE = 'inetd' ]; then
                echo 'MTA: is run via inetd';
        elif [ $DAEMON_MODE = 'none' ]; then
                echo 'MTA: is disabled';
        else
                echo 'MTA: is not running';
                fi;
        #
        # Check for split daemon mode (separate listener/queue runner)
        if is_running queue; then
                echo "QUE: $PID $COMMAND";
                ps -fwp $PID;
                if [ -S ${MTAQ_CNTL} ]; then
                        /usr/share/sendmail/smcontrol.pl \
                                -f ${MTAQ_CNTL} status || true;
                        fi;
        elif [ $QUEUE_MODE = 'cron' ]; then
                echo "QUE: is run via cron ($QUEUE_INTERVAL)";
        elif [ $QUEUE_MODE = 'none' ]; then
                echo 'QUE: is disabled';
        elif [ "$SPLIT_DAEMON" -eq 0 ]; then
                echo "QUE: Same as MTA";
        else
                echo 'QUE: is not running';
                fi;
        };
#------------------------------------------------------------------------------


#------------------------------------------------------------------------------
# Cronjob handling
#------------------------------------------------------------------------------
cron_mta () {
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # Obtain parameters IFF needed
        if [ -z "$SM_Get_Parameters" ]; then
                Get_Parameters;
                fi;
        #
        # If cron not needed, don't do queue running (though it wouldn't hurt)
        if [ $QUEUE_MODE = 'cron' ]; then
                #
                # If running a split (MTA/MSP) setup, we need to make sure that
                # messages not immediately accepted by the MTA get delivered.
                # Only run the MSP queue if MSP_MODE=none
                if check_msp; then
                        if [ $MSP_MODE = 'none' ]; then
                                # Make sure only *ONE* cronjob at a time
                                if [ ! -f $STAMP_DIR/cron_msp ]; then
                                        touch $STAMP_DIR/cron_msp;
                                        #clean_queues /var/spool/mqueue-client;
                                        $MSP_COMMAND -qf $MSP_A $MSP_L_QUEUE \
                                                $MSP_PARMS $MISC_PARMS \
                                                $CRON_PARMS || true;
                                        rm -f $STAMP_DIR/cron_msp;
                                        fi;
                                fi;
                        fi;

                # Make sure only *ONE* cronjob at a time
                if [ ! -f $STAMP_DIR/cron_mta ]; then
                        touch $STAMP_DIR/cron_mta;
                        $MTA_COMMAND -qf $MTA_A $MTAL_L_QUEUE \
                                $QUEUE_PARMS $MISC_PARMS $CRON_PARMS || true;
                        rm -f $STAMP_DIR/cron_mta;
                        fi;
                fi;
        };

cron_msp () {
        #
        # Make sure /var/run/sendmail/ exists
        check_dirs;
        #
        # Obtain parameters IFF needed
        if [ -z "$SM_Get_Parameters" ]; then
                Get_Parameters;
                fi;
        #
        # If cron not needed, don't do queue running (though it wouldn't hurt)
        if [ $MSP_MODE = 'cron' ]; then
                #
                # If running a split (MTA/MSP) setup, we need to make sure that
                # messages not immediately accepted by the MTA get delivered.
                if check_msp; then
                        # Make sure only *ONE* cronjob at a time
                        if [ ! -f $STAMP_DIR/cron_msp ]; then
                                touch $STAMP_DIR/cron_msp;
                                #clean_queues /var/spool/mqueue-client;
                                $MSP_COMMAND -qf $MSP_A $MSP_L_QUEUE \
                                        $MSP_PARMS $MISC_PARMS \
                                        $CRON_PARMS || true;
                                rm -f $STAMP_DIR/cron_msp;
                                fi;
                        fi;
                fi;
        };
#------------------------------------------------------------------------------


#------------------------------------------------------------------------------
# Determine how to run sendmail mta daemon
#       * No daemon
#       * As listener
#       * As queue runner
#       * As both listener and queue runner
#------------------------------------------------------------------------------
daemon_check () {
        local run_daemon;
        #
        # Skip daemon run for the following:
        #       * sendmail hasn't been configured
        #       * DAEMON_MODE = (none | inet) & QUEUE_MODE = (none | cron)
        if [ ! -s /etc/mail/sendmail.cf ] || \
           [ ! -s /etc/mail/sendmail.mc ]; then
                echo 'sendmail has not been configured, not started.';
                echo 'To configure sendmail, type sendmailconfig';
                exit 1;
                fi;

        MTAR_PARMS="-C/etc/mail/sendmail-rx.cf $MTAR_L";
        MTAL_PARMS="-C/etc/mail/sendmail-tx.cf $MTAL_L";
        MTAQ_PARMS="$MTA_A $MTAQ_L";
        run_daemon=3;

        case "$DAEMON_MODE" in
                none* | \
                inetd*)
                        run_daemon=`expr $run_daemon - 1`;
                        ;;

                daemon* | \
                *)
                        MTAL_PARMS="$MTAL_PARMS -bd $DAEMON_PARMS";
                        MTAR_PARMS="$MTAR_PARMS -bd $DAEMON_PARMS";
                        ;;
                esac;

        case "$QUEUE_MODE" in
                none* | \
                cron*)
                        run_daemon=`expr $run_daemon - 1`;
                        ;;

                daemon* | \
                *)
                        # Check for split daemon mode (separate listener/queue runner)
                        if [ $SPLIT_DAEMON -eq 0 ]; then
                                if [ ! -z "$QUEUE_INTERVAL" ]; then
                                        MTAL_PARMS="$MTAL_PARMS -q${QUEUE_INTERVAL}";
                                        MTAR_PARMS="$MTAR_PARMS -qp";
                                        fi;
                                MTAL_PARMS="$MTAL_PARMS $QUEUE_PARMS";
                                MTAR_PARMS="$MTAR_PARMS $QUEUE_PARMS";
                        else
                                if [ ! -z "$QUEUE_INTERVAL" ]; then
                                        MTAQ_PARMS="$MTAQ_PARMS -q${QUEUE_INTERVAL}";
                                        fi;
                                MTAQ_PARMS="$MTAQ_PARMS $QUEUE_PARMS";
                                fi;
                        ;;
                esac;

        # Add any miscellanous (ie debugging) parameters
        MTAR_PARMS="$MTAR_PARMS $MISC_PARMS";
        MTAL_PARMS="$MTAL_PARMS $MISC_PARMS";
        MTAQ_PARMS="$MTAQ_PARMS $MISC_PARMS";

        # Add PidFile override for MTA queue runner
        MTAQ_PARMS="$MTAQ_PARMS -O PidFile=$MTAQ_PIDFILE";
        MTAQ_PARMS="$MTAQ_PARMS -O ControlSocketName=$MTAQ_CNTL";

        if [ $run_daemon -lt 2 ]; then
                echo 'sendmail listen/queue daemon not desired.';
                exit 0;
                fi;
        };
#------------------------------------------------------------------------------


#------------------------------------------------------------------------------
# Clean sendmail queues (somewhat): does *not* support split qf/df/xf dirs.
# NOTE: This whole thing sucks with queue-groups, need to redo it!!!
# NOTE: Check for race conditions betwixt this code and queue-runners
#------------------------------------------------------------------------------
clean_queues () {
        local QUEUE_ROOT QUEUE QUIET
        # Obtain queue root directory
        if [ -z "$1" ]; then
                QUEUE_ROOT=/var/spool/mqueue
                QUEUE=/var/spool/mqueue
                QUIET=''
        else
                QUEUE_ROOT="$1"
                QUEUE="$1"
                QUIET='1'
                fi
        # remove lock files left because of kill/crash
        # rm -f $QUEUE/[lnx]f* doesn't work with a plethora of files ;-(
        for i in A B C D E F G H I J K L M N O P Q R S T U V W X Y Z \
                a b c d e f g h i j k l m n o p q r s t u v w x y z; do
                rm -f $QUEUE/[lnx]f${i}*
                done
        # remove zero length qf files
        #for qffile in $QUEUE/qf*; do
        for qffile in $(find $QUEUE_ROOT -type f -name 'qf*'); do
                if [ -r "$qffile" ] && [ ! -s "$qffile" ]; then
                        if [ ! -z "$QUIET" ]; then
                                echo -n "<zero: $qffile> "; fi
                        rm -f "$qffile"
                        fi
                done
        # rename tf files to be qf if the qf does not exist
        for tffile in $QUEUE/tf*; do
                qffile=`echo "$tffile" | sed 's/\/tf\([[:alnum:]]*\)$/\/qf\1/'`
                if [ -r "$tffile" ] && [ ! -f "$qffile" ]; then
                        if [ ! -z "$QUIET" ]; then
                                echo -n "<recovering: $tffile> "; fi
                        mv "$tffile" "$qffile"
                elif [ -f "$tffile" ]; then
                        echo -n "<extra: $tffile> "
                        rm -f "$tffile"
                        fi
                done
        # remove df files with no corresponding qf files
        for dffile in $QUEUE/df*; do
                qffile=`echo "$dffile" | sed 's/\/df\([[:alnum:]]*\)$/\/qf\1/'`
                Dffile=`echo "$dffile" | sed 's/\/df\([[:alnum:]]*\)$/\/Df\1/'`
                if [ -r "$dffile" ] && [ ! -f "$qffile" ]; then
                        if [ ! -s "$dffile" ]; then
                                rm -f "$dffile"
                        else
                                if [ ! -z "$QUIET" ]; then
                                         echo -n "<incomplete: $dffile> "; fi
                                mv "$dffile" "$Dffile";
                                fi
                        fi
                done
        # announce files that have been saved during disaster recovery
        for xffile in $QUEUE/[A-Z]f*; do
                if [ -f "$xffile" ]; then
                        if [ ! -z "$QUIET" ]; then
                                echo -n "<panic: $xffile> "; fi
                        fi
                done
        }
#------------------------------------------------------------------------------

#------------------------------------------------------------------------------
# check_dirs:  Make sure /var/run/sendmail/{mta,msp,stampdir} exist
#------------------------------------------------------------------------------
check_dirs () {
        if [ ! -d "${SENDMAIL_ROOT}" ]; then
                mkdir -p "${SENDMAIL_ROOT}";
                chown root:smmta "${SENDMAIL_ROOT}";
                chmod 02755 "${SENDMAIL_ROOT}";
                fi;
        if [ ! -d "${MTA_ROOT}" ]; then
                mkdir -p "${MTA_ROOT}";
                chown $DAEMON_UID:smmta "${MTA_ROOT}";
                chmod 02755 "${MTA_ROOT}";
                fi;
        if [ ! -d "${MSP_ROOT}" ]; then
                mkdir -p "${MSP_ROOT}";
                chown smmsp:smmsp "${MSP_ROOT}";
                chmod 02775 "${MSP_ROOT}";
                fi;
        if [ ! -d "${STAMP_DIR}" ]; then
                mkdir -p "${STAMP_DIR}";
                chown root:smmsp "${STAMP_DIR}";
                chmod 02775 "${STAMP_DIR}";
                fi;
        }

#------------------------------------------------------------------------------
# Why are we here ?
#------------------------------------------------------------------------------
# Some requisite initialization
if [ -z "$SM_Get_Parameters" ]; then
        Get_Parameters;
        fi;
if [ "$LOG_CMDS" = "Yes" ]; then
        logger -i -p mail.debug -- "$0 $@";
        fi;

#------------------------------------------------------------------------------
# Handle being called via an alias
#------------------------------------------------------------------------------
case $(basename $0) in
        newaliases)
                newaliases $*;
                exit $?;
                ;;
        hoststat)
                hoststat $*;
                exit $?;
                ;;
        purgestat)
                purgestat $*;
                exit $?;
                ;;
        mailstats)
                mailstats $*;
                exit $?;
                ;;
        mailq)
                mailq $*;
                exit $?;
                ;;
        runq)
                runq $*;
                exit $?;
                ;;
        control|smcontrol)
                control $*;
                exit $?;
                ;;
        status)
                status $*
                exit $?
                ;;
        *)
                ;;
        esac;

#------------------------------------------------------------------------------
# Handle being called via /etc/init.d/sendmail or directly
#------------------------------------------------------------------------------
# Ok, why are we here...
case "$1" in

        #-----------------------------------------------------------------------
        # Debian required/optional targets:
        #-----------------------------------------------------------------------
        start)
                echo -n 'Starting Mail Transport Agent: sendmail';
                start_sendmail;
                echo '.'
                ;;

        stop|force-stop)
                echo -n 'Stopping Mail Transport Agent: sendmail';
                stop_sendmail;
                echo '.'
                ;;

        restart)
                echo -n 'Restarting Transport Agent: sendmail';
                # reload is equivalent (but faster) than stop/start !
                # but... it doesn't honor changes to /etc/mail/sendmail.conf
                #reload_sendmail;
                stop_sendmail;
                start_sendmail;
                echo '.';
                ;;

        restart-if-running)
                if ! is_running mta && ! is_running msp; then
                        echo 'Mail Transport Agent: sendmail is not running';
                else
                        $0 restart;
                        fi;
                ;;

        reload-if-running)
                if ! is_running mta && ! is_running msp; then
                        echo 'Mail Transport Agent: sendmail is not running';
                else
                        $0 reload;
                        fi;
                ;;

        reload|force-reload)
                echo -n 'Reloading Mail Transport Agent configuration: sendmail';
                reload_sendmail;
                echo '.';
                ;;

        #-----------------------------------------------------------------------
        # Local targets (sendmail commands/aliases) for MSP/MTA split support
        # These targets will pass along any provided parameters
        #-----------------------------------------------------------------------
        newaliases)
                shift;
                newaliases $*;
                ;;

        hoststat)
                shift;
                hoststat $*;
                ;;

        purgestat)
                shift;
                purgestat $*;
                ;;

        mailstats)
                shift;
                mailstats $*;
                ;;

        mailq)
                shift;
                mailq $*;
                ;;

        runq)
                shift;
                runq $*;
                ;;

        control|smcontrol)
                shift;
                control $*;
                ;;

        #-----------------------------------------------------------------------
        # Local targets for extended support/debugging
        #-----------------------------------------------------------------------
        status)
                shift;
                status $*;
                ;;

        debug)
                #
                # If not running, can't debug
                if is_running msp; then
                        echo -n 'Dumping MSP state...';
                        $SIGNAL_MSP_CMD --signal USR1;
                        echo 'done.';
                        fi;
                if is_running mta; then
                        echo -n 'Dumping MTA state...';
                        $SIGNAL_MTAL_CMD --signal USR1;
                        echo 'done.';
                        fi;
                ;;

        clean|clean_que*|clean-que*)
                #
                # If running, don't clean the queues...
                if is_running mta; then
                        echo 'MTA is running, queue cleaning ill advised...';
                else
                        echo -n 'Cleaning up the queues...';
                        clean_queues;
                        echo 'done.';
                        fi;
                ;;

        #-----------------------------------------------------------------------
        # Local targets for cronjob support
        #-----------------------------------------------------------------------
        cron-msp)
                cron_msp;
                ;;

        cron-mta)
                cron_mta;
                ;;

        #-----------------------------------------------------------------------
        # Default target - bitch and moan
        #-----------------------------------------------------------------------
        *)
                echo "Invalid command <$1>";
                echo "Usage: $0 <command>";
                echo '  Where <command> is one of the following';
                echo '    start|stop|restart|restart-if-running';
                echo '    reload-if-running|reload|force-reload';
                echo '    newaliases|hoststat|purgestat|mailstats|mailq|runq|control';
                echo '    status|debug|clean';
                exit 1;
                ;;
        esac;

exit 0;


Scalix Installation

Installieren === 

cd /usr/src/scalix-debian-11.0.4-GA/software/scalix-server

dpkg -i ../../third_party/libical/i386/libical*.deb
dpkg -i scalix-server_*.deb

export PATH=/opt/scalix/bin:$PATH

echo -n "What should the name of your primary mailnode be? "; read mnode

ldomain=$(hostname -d)
host=$(hostname)
fqdn=$(hostname -f)
short=${host:0:1}${host: -1:1}

# Initialize the Scalix Message Store 
ommakeom

# Set Generation Rules for Display Name, Login Name and Internet Address
sxconfig --set -t general.usrl_cn_rule='S, G'
sxconfig --set -t general.usrl_authid_rule='gs@'
sxconfig --set -t orniasys.name_part_1='"C" <G.S>' -t orniasys.domain_part_1=$ldomain

# Creating the Default Mailnode 
omaddmn -m $mnode

# Starting the Server Daemons
omrc -n

# Creating the Default Admin User
echo -n "Please enter the admin password for the Scalix admin user (sxadmin)? "; read admpwd

omaddu -n sxadmin/$mnode --class limited -c admin -p "$admpwd" sxadmin

# Configuring the Admin User
omconfenu -n "sxadmin/$mnode"
omlimit -u "sxadmin/$mnode" -o -i 0 -m 0

# Creating the LDAP Query User
echo -n "Please enter a password for the ldap query user? "; read ldappwd

omaddu -n sxqueryadmin/$mnode --class limited -c admin -p $ldappwd sxqueryadmin@$fqdn

# Creating the Standard Scalix Admin Groups
omaddpdl -l ScalixUserAdmins/$mnode
omaddpdl -l ScalixUserAttributesAdmins/$mnode
omaddpdl -l ScalixGroupAdmins/$mnode
omaddpdl -l ScalixAdmins/$mnode

cat >>/var/opt/scalix/${short}/s/sys/general.cfg <<EOF
#
# The CDA service (used for "type down" in some clients) is more
# efficient if it can check the directory change log before attempting
# to update the access tables that it uses.   One slow machines, it may
# also be worth uncommenting the CDA_CHECKTIME tweak to reduce the check
# interval from five minutes to an hour.
#
CDA_USE_CHANGE_LOG=TRUE
# CDA_CHECKTIME=60
#
# These tweaks limit the number and rate of IMAP connections to the
# server. The IMAP_CONNECTION_LIMIT simply restricts the total number of
# connections to the server. Note that many IMAP clients have several
# connections for each IMAP session. The IMAP_CONNRATE_LIMIT restricts
# the rate at which clients can connect to the server, in this case, at
# most 10 connections per second. If clients try to connect faster
# than that, the IMAP server simply slows down the rate at which it will
# accept new connections.
#
IMAP_CONNECTION_LIMIT=500
IMAP_CONNRATE_LIMIT=10
#
# The IMAP_IDLE_TIMEOUT tweak is the maximum time an IMAP connection
# will wait for a command before terminating the connection. The default
# setting, and the minimum required setting, is 30 minutes. Some
# clients "refresh" their connection once every thirty minutes
# exactly -- but if they are a little bit late, the server drops their
# connection. Setting a timeout of 31 minutes avoids this problem.
#
IMAP_IDLE_TIMEOUT=31
#
# This tweak arranges for Local Delivery to automatically create a
# message store for users created without one.
# Users added with the bulk-add mechanism used by the
# wizard do not have a message store. So setting this tweak allows
# them to receive mail before they are initially signed on.
#
LD_CREATE_MESSAGE_STORE=TRUE
#
# These three tweaks allow users to sign on using an alias. Only
# system-defined aliases are permitted and it the alias name is ignored
# for the purposes of message creation and so on.
# 
# Note that changing these settings normally requires restarting Scalix.
#
UAL_SIGNON_ALIAS=YES
UAL_SIGNON_ALIAS_CONFIG=SYS
UAL_USE_SIGNON_ALIAS=FALSE
EOF


# Starting Scalix Services
omon -s all

# Installing the Scalix Server package
# ein Deb-Paket (scalix-tomcat_*.deb) hat einen Fehler im Install-Skript.
# Der muss zuerst behoben werden (Deb auspacken, Syntax Error korrigieren, Deb-Paket neu erstellen)
dpkg -i scalix-postgres_*.deb scalix-tomcat-connector_*.deb scalix-tomcat_*.deb \
        scalix-mobile_*.deb scalix-platform_*.deb scalix-res_*.deb scalix-sac_*.deb \
        scalix-sis_*.deb scalix-swa_*.deb

# Setup DB
/opt/scalix-postgres/bin/sxpsql-init                  # To create the database and tables
echo -n "Please enter a password for the db user? "; read dbpwd

/opt/scalix-postgres/bin/sxpsql-setpwd $dbpwd

echo -n "Please enter the external ip address of your Scalix box? "; read ip

/opt/scalix-postgres/bin/sxpsql-whitelist 127.0.0.1 $ip

# Setting up Scalix-Tomcat
vi /etc/opt/scalix-tomcat/scalix-tomcat.conf
# Set RAM Usage to 50% of complete RAM (or other, e.g. 40M)
# JAVA_OPTS="-server -Xms40m -Xmx40m"

# Configure Scalix
tomcatport=80
base=/var/opt/scalix/${short}
files="$base/webmail/swa.properties \
       $base/caa/scalix.res/config/ubermanager.properties \
       $base/res/config/res.properties \
       $base/platform/platform.properties \
       $base/mobile/mobile.properties \
       $base/sis/sis.properties"

for file in $files; do
sed -e "s;%LOCALDOMAIN%;$ldomain;g" \
    -e "s;%LOCALHOST%;$fqdn;g" \
    -e "s;%PLATFORMURL%;$fqdn;g" \
    -e "s;__SECURED_MODE__;false;g" \
    -e "s;ubermanager/__FQHN_HOST__@__KERBEROS_REALM__;;g" \
    -e "s;__KERBEROS_REALM__;;g" \
    -e "s;__FQHN_FOR_KDC_HOST__;;g" \
    -e "s;__FQHN_QUERY_SERVER_NAME__;$fqdn;g" \
    -e "s;__UBERMGR_USE_EXTERNAL_AUTH__;false;g" \
    -e "s;__UBERMGR_ALLOW_EXTERNAL_AUTH__;false;g" \
    -e "s;__UBERMGR_MAXLIST_SIZE__;100;g" \
    -e "s;__UBERMGR_MAIL_DOMAINS_LIST__;$ldomain;g" \
    -e "s;__UBERMGR_EXTERNAL_DOMAIN_AUTH_LIST__;;g" \
    -e "s;__CONFIGURED__;true;g" \
    -e "s;__FQHN_FOR_UBERMANAGER__;$fqdn;g" \
    -e "s;__TOMCAT_PORT__;$tomcatport;g" \
    -e "s;localhost;$fqdn;g" \
    -e "s;%SIS-LANGUAGE%;German;g" \
    -e "s;%INDEX-WHITELIST%;$fqdn;g" \
    -e "s;%SEARCH-WHITELIST%;$fqdn;g" \
    $file > $file.neu
mv $file.neu $file

done

# Write Ldappassword to psdata
cd ${base}/caa/scalix.res/config
echo "$ldappwd" > psdata
chown root:root psdata
chmod 400 psdata
cd

# Restart Tomcat
/etc/init.d/scalix-tomcat restart

# Setup Apache
ln -s /opt/scalix/global/httpd/scalix-web-client.conf /etc/apache2/conf.d
cat << EOF > /etc/apache2/conf.d/scalix-access.conf
<Location />
        Allow from all
</Location>
EOF
/etc/init.d/apache2 restart

cat << EOT
#####################################################
# You should now be able to access scalix at:
# http://$fqdn/sac
# http://$fqdn/webmail
#####################################################
EOT

Jetzt sollte man sich in o.g. URL als sxadmin und dem vorher definierten Password einloggen können. Als sxadmin kann man in der AdminConsole (SAC) neue User anlegen.

Quellen

[1] Scalix Wiki: Manuelle Installation unter Etch

[2] Linux Magazin Online: Mail Server

Abgerufen von „http://neobiker.de/wiki/index.php?title=Scalix_mit_Debian_Etch&oldid=600“